Manual.ly Logo

Ergotec PM-705N Bedienungsanleitung

0,0 · 0 Bewertungen

PDF-Handbuch · 2 Seiten

Deutsch

M: QW-35-FL
Seite

/ 2

Loading...
06ad1698421329e9c938a74e7e1f0f0f9358 page 2
Thank you for deciding to buy your new seat post from our company.
Compare the level number on the seat post with the adjacent table
in order to check whether it is suitable for the intended use.
Before fitting the seat post please make sure that it is suitable
for the maximum approved weight of the bike. You will find the
relevant information on the product description or obtain it from
your bicycle dealer.
Before use please read the following assembly and safety
instructions carefully. Keep them in a safe place and pass
them on to the next owner if necessary.
Assembly
Basic technical knowledge is required for the assembly of this product. If you do
not have this knowledge, please use the services of a specialist bicycle dealer.
Before assembly please check that the outer diameter of the seat post
(27.2 or 31.6 mm) matches the inner diameter of the seat tube of the frame.
If the clamping area of the seat tube of the frame is larger, you can adjust the
diameter with a suitable seat post adapter (min. length 80 mm). For safety
reasons we recommend the use of original ergotec seat post adapters. These
are available from specialist bicycle dealers.
The end of the seat tube must be free from burrs, otherwise
there is a risk of breaking!
Before the seat post is inserted the clamping area of the seat tube should
always be treated with water-resistant grease, because otherwise corrosion
could make subsequent modification of the seating height difficult.
You now insert the seat post into the seat tube of the frame.
For safety reasons the seat post must be inserted into the seat
tube to the depth which is marked (80 mm), unless the bicycle
manufacturer has specified greater insertion depth. Please refer
to the user information provided by the bicycle manufacturer.
In order to fix the seat post in the frame you tighten the clamping screw of the
seat post or the quick-clamping mechanism to the level of tightness specified
by the bicycle manufacturer.
Before mounting the saddle please check the compatibility of the seat post and
the saddle.
Press protector
c
out of the parallelogram joint.
Now place the frame of the saddle into the two guide grooves of the saddle
clamp.
Next you adapt the position of the saddle to your individual requirements.
Now you tighten the saddle clamping screw
d
with a 5 mm hexagonal key
to a torque of 8 Nm.
After that you replace protector
c
in the parallelogram joint.
For safety reasons the max. torque of 8 Nm
should not be exceeded.
Setting
You can adapt the suspension individually to your body weight, cycling style and
road surface.
For this purpose you sit on the saddle. With the correct setting the seat post
should approx. bottom out at 20 % of the suspension travel (approx. 5 mm).
In order to increase the hardness of the suspension you first remove locking
nut
e
at the base of the seat post by turning it in an anti-clockwise direction
with a 6 mm hexagonal key.
You can now turn adjusting nut
f
with a 10 mm hexagonal key in a clockwise
direction for a harder setting and anti-clockwise for a softer setting.
After that you replace the locking nut and tighten it until it is handtight.
If the standard settings are not suitable for you can obtain steel springs from a
specialist bicycle dealer. We offer these in 4 different levels of hardness:
up to 70 kg / Art.Nr. 06036000, 70 - 90 kg / Art.Nr. 06036100,
90 - 110 kg / Art.Nr. 06036200, 110 - 130 kg / Art.Nr. 06036300
To exchange the steel spring you first release the seat post clamp or the
quick-clamping mechanism.
You now withdraw the seat post from the seat tube of the frame.
Next you remove snap ring
g
with a snap ring spanner.
Assembly and safety instructions for
Suspension seat post PM-705N
Mountain-Bike/Race-Bike Safety Level
max. 100 kg max. 100 kg
max. 120 kg max. 120 kg
E-BIKE
25 km/h + 45 km/h
max. 100 kg max. 100 kg
max. 120 kg max. 120 kg
Trekking-Bike Safety Level
max. 100 kg max. 100 kg
max. 120 kg max. 120 kg
max. 140 kg max. 140 kg
max. 160 kg max. 160 kg
E-BIKE
25 km/h max. 140 kg max. 100 kg
E-BIKE
25 km/h max. 160 kg max. 140 kg
E-BIKE
45 km/h* max. 140 kg max. 140 kg
E-BIKE
45 km/h* max. 160 kg max. 140 kg
City-Bike Safety Level
max. 100 kg max. 100 kg
max. 120 kg max. 120 kg
max. 140 kg max. 140 kg
max. 160 kg max. 160 kg
max. 180 kg max. 180 kg
E-BIKE
25 km/h max. 140 kg max. 100 kg
E-BIKE
25 km/h max. 160 kg max. 140 kg
E-BIKE
25 km/h max. 180 kg max. 160 kg
E-BIKE
45 km/h* max. 140 kg max. 140 kg
E-BIKE
45 km/h* max. 160 kg max. 140 kg
Jugend/Young adult Safety Level
max. 100 kg max. 100 kg
Kinderrad/Youth-Bike Safety Level
12"-24"
Lenksystem
Steering system
Sattelstütze
Seatpost
The product classification of the ergotec Safety Level corresponds
to the DIN EN ISO 4210 norm for bikes and DIN EN 15194 for e-bikes.
E-bike-type: pedal assist up to the indicated speed.
* Retrofitting only with the approval of a recognised certifying
body and entry in the documents for the bike.
english
Valid: 06.04.2017
Guarantee
For ergotec seat posts the following guarantee periods apply:
with safety level 6 6 years or 35,000 km
with safety level 5 5 years or 30,000 km
with safety level 4 4 years or 25,000 km
with safety level 3 3 years or 20,000 km
with safety level 2 3 years or 15,000 km
Guarantee claims should be processed
through a specialist bicycle dealer.
Safety instructions
The tightness of the bolts must be checked after approx. 500 km and once more
during the regular service intervals (with once a year as a minimum).
The seat post is not suitable for competitions. The high level of strain
could lead to damage to the seat post.
No additional weights such as child seats, luggage racks or trailers
should be attached to the seat post. Excessive loading can cause the
seat post to break.
To prevent the risk of a fall or accident the seat post must always
be replaced if it has been damaged.
CYCLINGRIGHT.COM
k
i
h
f
g
e
Direction of driving
c
j
d
Direction of driving
Remove locking nut
e
by turning it clockwise with a 6 mm hexagonal key.
Now remove adjusting nut
f
from the seat post by turning it ant-clockwise
with a 10 mm hexagonal key.
You can now remove centering sleeve
h
, steel spring
i
and sleeve
k
.
For assembly you implement the above steps in reverse.
Maintenance
In order to ensure high performance, safety and a long product life, regular
maintenance is required after approx. 200 operating hours or at least once a year.
Greasing the bearings
For this purpose you remove protector
c
from the parallelogram joint.
Now carefully clean the entire area of the 4 bearings
j
with a biodegradable
cleaning agent.
Then you grease the entire area of bearings
j
with an acid-free grease,
which can be obtained from a specialist bicycle dealer.
After that you replace protector
c
in the parallelogram joint.
You should always use acid-free grease, because otherwise
the bearings could be chemically altered or destroyed.

Chatten Sie mit Ihrem Ergotec PM-705N-Handbuch mithilfe von KI

Erhalten Sie sofortige KI-Antworten aus Ihrem Ergotec PM-705N-Handbuch

Fragen Sie alles über Ergotec PM-705N. Antworten stammen aus diesem Handbuch, mit den Seiten, auf denen sie basieren.

PM-705N Wartungsplan

Erinnere mich, wenn eine Wartung faellig ist
Jährlich
Schraubenfestigkeit prüfen

Die Festigkeit der Schrauben regelmäßig während der Wartungsintervalle, mindestens einmal jährlich, überprüfen.

Jährlich
Parallelogramm-Lager schmieren

Die vier Lager mit biologisch abbaubarem Reinigungsmittel säubern und mit säurefreiem Fett schmieren, um Schäden zu vermeiden.

Alle 500 km
Schraubenfestigkeit prüfen

Die Festigkeit der Schrauben nach etwa 500 km zur Gewährleistung der Sicherheit prüfen.

Alle 200 Stunden
Regelmäßige Wartung durchführen

Eine regelmäßige Wartung ist nach ca. 200 Betriebsstunden oder mindestens einmal jährlich für Leistung und Sicherheit erforderlich.

Kostenlose Wartungserinnerungen

Abgestimmt auf Ihr Kaufdatum. Immer kostenlos, jederzeit abbestellbar.

Mit dem Absenden stimmen Sie der Datenschutzerklarung zu. Sie konnen sich in jeder E-Mail mit einem Klick abmelden.
M: qwen/qwen3.8-flash

Stellen Sie eine Frage

0/1000

Empfehlen Sie PM-705N?

Ja Nein

Häufig gestellte Fragen

A

Ja, sie passt zu Mountain-, Trekking- und Stadträdern mit spezifischen Sicherheitsleveln, die für verschiedene maximale Gewichte bis zu 180 kg bewertet sind.

Ist diese Antwort hilfreich?

A

Drehen Sie die Einstellmutter im Uhrzeigersinn für härtere Einstellungen und gegen den Uhrzeigersinn für weichere, wobei Sie eine ordnungsgemäße Vorspannung für Ihr Gewicht sicherstellen.

Ist diese Antwort hilfreich?

A

Die Garantie dauert je nach spezifischem Sicherheitslevel des Geräts drei bis sechs Jahre oder 15.000 bis 35.000 km.

Ist diese Antwort hilfreich?

A

Nein, zusätzliche Gewichte wie Kindersitze oder Anhänger dürfen nicht angebracht werden, da dies zu übermäßiger Belastung und Bruchgefahr führt.

Ist diese Antwort hilfreich?

A

Reinigen und fetten Sie die Lager nach 200 Betriebsstunden oder mindestens einmal im Jahr, um Sicherheit und Langlebigkeit zu gewährleisten.

Ist diese Antwort hilfreich?

A

Sie müssen die Sattelstütze mindestens 80 mm in das Sattelrohr einsetzen, es sei denn, der Fahrradhersteller gibt eine größere Tiefe an.

Ist diese Antwort hilfreich?

A

Ja, Sie benötigen 6 mm und 10 mm Inbusschlüssel für die Federungseinstellung und 5 mm für die Sattelklemme.

Ist diese Antwort hilfreich?

M: QW-35-FL

Vorteile und Nachteile

Vorteile

  • Einstellbare Federungsvorspannung ermöglicht Abstimmung auf Körpergewicht und Fahrstil
  • Kompatibel mit säurefreiem Fett für Langlebigkeit und Komponentenschutz
  • Garantieabdeckung reicht bis zu sechs Jahre je nach Sicherheitslevel
  • Austauschbare Stahlfedern bieten Anpassung für unterschiedliche Gewichtsbereiche
  • Klare Drehmomenteinstellungen sorgen für korrekte Montage ohne Schäden
VS

Nachteile

  • Benötigt grundlegende technische Kenntnisse für ordnungsgemäße Installation und Einstellung
  • Nicht für Wettkampfracing geeignet aufgrund hoher Beanspruchungsrisiken
  • Wartungszeitplan erfordert Reinigung und Fetten in regelmäßigen Abständen
  • Kindersitze oder Gepäckträger können nicht direkt an der Sattelstütze angebracht werden
  • Beschränkt auf spezifische Sattelrohrdurchmesser von 27,2mm oder 31,6mm
M: QW-35-FL

Produkt Spezifikation

Typ

Gefederte Sattelstütze

Farbe

Schwarz

Material

Aluminium 7075

Länge

350,01 mm

Durchmesser

31,50 mm

Federweg

26,92 mm

Gewicht

0,61 kg

M: QW-35-FL

Produkt Beschreibung

Verbessern Sie Ihre Fahrt mit überlegenem Komfort

Das Fahren auf glatten Trails erfordert Ausrüstung, die sich an das Terrain anpasst. Die Ergotec PM-705N 31.6mm Sattelstütze mit Federung bietet eine Lösung für Radfahrer, die weniger Ermüdung und verbesserten Grip auf rauen Oberflächen suchen. Wenn Sie das Handbuch der Ergotec PM-705N 31.6mm Sattelstütze mit Federung konsultieren, entdecken Sie ein Gerät, das für Vielseitigkeit bei Mountain-, Trekking- und Stadträdern ausgelegt ist. Es sticht im Leistungstest hervor.

Installation und Sicherheit

Eine ordnungsgemäße Installation ist für die Sicherheit entscheidend. Die Sattelstütze passt in Sattelrohre mit 31,6 mm Durchmesser, obwohl es 27,2 mm Modelle mit Adaptern gibt. Stellen Sie sicher, dass das Rohrende des Rahmens frei von Graten ist, um Brüche zu verhindern. Tragen Sie wasserbeständiges Fett auf den Klemmbereich auf, um zukünftige Korrosion zu vermeiden. Die minimale Einsatztiefe muss die 80 mm-Marke erreichen, um die Struktur effektiv zu sichern.

Einstellung der Federung

Ein herausragendes Merkmal ist die einstellbare Schraubenfeder. Fahrer können die Vorspannung basierend auf ihrem Körpergewicht und Fahrstil einstellen. Durch Drehen der Einstellmutter wird die Federung entweder weicher oder härter. Der empfohlene Startpunkt ist ein Rebound von etwa 20 Prozent des gesamten Hubwegs, ca. 5 mm, wenn ein Fahrer auf dem Sattel sitzt.

Wartungsrichtlinien

Die Langlebigkeit hängt von regelmäßiger Pflege ab. Das Reinigen und Schmieren der Lager alle 200 Betriebsstunden oder jährlich hält den Mechanismus reibungslos am Laufen. Verwenden Sie ausschließlich säurefreies Fett, um die internen Komponenten vor chemischen Schäden zu schützen. Überprüfen Sie regelmäßig alle 500 km die Bolzenfestigkeit, um eine sichere Leistung zu gewährleisten.

Wichtige Hinweise

Diese Komponente ist aufgrund hoher Belastungsstufen nicht für den Wettkampfsport vorgesehen. Vermeiden Sie das Anbringen von Gepäckträgern oder Kindersitzen direkt an der Sattelstütze. Die Garantieabdeckung variiert je nach Sicherheitslevel zwischen drei und sechs Jahren, wie am Gerät angegeben. Tauschen Sie das Gerät sofort aus, wenn Schäden festgestellt werden, um Unfälle zu verhindern. Es ist entscheidend, das Gerät vor jeder Fahrt optisch auf Risse zu überprüfen.

Das System unterstützt verschiedene maximale Gewichtslimits, die durch Sicherheitslevel definiert sind. Manche Level passen für Stadträder bis zu 180 kg. Für spezifische Gewichtsbereiche zwischen 70 und 130 kg sind verschiedene Stahlfedern erhältlich. Diese Anpassung sorgt für optimale Leistung für einzelne Fahrer. Befolgen Sie immer die vom Hersteller angegebenen Drehmomenteinstellungen. Die Sattelklemme erfordert eine Anzugskraft von 8 Nm. Die Überschreitung dieses Limits kann die Sattelschienen oder den Stützkopf beschädigen. Eine professionelle Installation wird empfohlen, falls technisches Wissen fehlt. Wartung sorgt über die Zeit für Zuverlässigkeit. Stellen Sie sicher, dass alle Bolzen korrekt festgezogen sind, um ein Verrutschen während des Betriebs zu verhindern. Dies schützt den Fahrer vor potenziellen Stürzen. Regelmäßige Checks helfen, Sicherheitsstandards während der gesamten Lebensdauer aufrechtzuerhalten.

M: QW-35-FL

© Copyright 2026 Manual.ly