Manual.ly Logo

Hudora Big Wheel Style 230 Bedienungsanleitung

0,0 · 0 Bewertungen

PDF-Handbuch · 12 Seiten

Deutsch

M: qwen/qwen3.5-flash-20260224
Seite

/ 12

Loading...
6b9c0186bb04cc6a18c95ab4b04250b95153 page 5
5/12
INSTRUCTIONS ON ASSEMBLY
No tools are required to assemble the product. The scooter is delivered in its
transport form (folded)! (Picture 1)
Please proceed as follows to get the scooter ready for use
• Pull the lever that is in the direction of movement, located to the right of the folding
mechanism, in order to release the transportation lock. (Picture. 2)
• Unfold the scooter‘s handlebars upwards.
• Now push the folding hinge towards the handlebar stem until you hear it click
into place. (Picture 3)
• Loosen the quick release fastener on the T-piece of the handlebar shaft by
pushing the lever away from the T-piece. (Picture. 4). Insert the handlebar
grips in the T-piece of the handlebar grip. Use your thumbs to press down
both locking buttons until the the grips can be easily pushed into the T-section.
Turn the handlebar grips until the locking buttons are positioned in the two
openings intended for them and you hear them click into place. Check that
both handlebar grips are fitted correctly by pulling both outwards. Do not let
the two hand grips move out of their locking mechanism, once they are fitted
properly. Now close the quick release fastener on the T-piece of the handlebar
shaft, by inserting the lever into the T-piece. In case the grips are not firmly
fitted enough, open the quick release fastener again and turn the screw on the
opposite side deeper into the thread, so that the fastening clamp tightly sits on
the T-piece.
• Loosen the quick release lock on the handlebar rod by pushing the lever of the quick
release lock until the lever is parallel to the handlebar grip. (Picture 5)
• The handlebars can be locked into place at 4 different heights. Pull the hand-
lebar rod out of the handlebar stem until it is at the required height and the
relevant button has snapped into place. (Picture 6) The maximum height can-
not be exceeded due to the integrated lock.
• Now close the quick release lock by pushing the lever down to the handlebar
stem. (Picture 5)
• In the event that the handlebar does not sit tight enough at the selected height,
open the quick release fastener again and turn the screw on the opposite side
deeper into the thread, so that the fastening clamp tightly sits on the handle-
bar. Repeat this process until the handlebar can be securely adjusted.
• All parts should always by checked for secure fitting before being used, in
particular the folding mechanism, the steering lock and the wheels.
To get the scooter ready for transport again, please carry out the following
actions
• Loosen the quick release lock by pushing the lever of the quick release lock
away from the handlebar stem. (Picture 5)
• Please press the locking button so that the handlebar rod can be moved. (Pic-
ture 6)
• Push the handlebar rod as far as it will go into the handlebar stem.
• Close the quick release lock by pushing the lever down to the handlebar stem.
(Picture 5)
• Loosen the quick release fastener on the T-piece of the handlebar shaft by
pushing the lever away from the T-piece.
• Use your thumbs to press both locking buttons in the handlebar grips and pull the
handlebar grips outwards until they are released completely from the T-sec-
tion. (Picture 4)
• Press the handlebar grips far down until they are parallel to the handlebar
shaft and can be pressed it into the appropriate supports.
• Now close the quick release fastener on the T-piece of the handlebar shaft, by
placing the lever around the T-piece.
• Pull the lever that is in the direction of movement, located to the right of the
folding mechanism, in order to release the assembly lock. (Picture. 2)
• Fold up the scooter by moving the handlebar rod towards the back wheel until
you hear the transport lock click into place. (Picture. 1)
USAGE INSTRUCTIONS
Nothing’s easy at rst …
... most accidents happen to “beginners” within the first ten minutes. Particular
care should be taken during this stage.
Usage instructions
The scooter moves when a foot is used to regularly push off, just as with well-
known children’s scooters. Braking is no problem either - simply step on the
friction brake over the back wheel (mudguard).
We recommend folding the scooter by hand after each ride or using the double
stand located under the running board. Its use is ensured through simply folding
and unfolding.
Aluminium is a good and light material but should also be handled carefully as it
is not as hard as steel, for example.
MAINTENANCE AND STORAGE
Use a dry or damp cloth only to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and after
each use. Do not make any structural changes. For your own safety, please use
original spare parts only. These can be sourced from HUDORA. If parts become
damaged or if sharp edges or corners should develop, the product may not be
used any more. If in any doubt, please contact our service team (http://www.
hudora.de/). Store the product in a safe place where it is protected from the
elements, cannot be damaged, and cannot injure anyone.
Replace damaged or worn assembly parts in order to ensure the safety of your
scooter.
WHEEL CHANGE
Replacement wheels are available as accessories from http://www.hudora.
de/service/ and should be replaced when they are worn down. To change the
wheels, loosen the axle fitting with two Allen keys and take the wheels off the
axle. A screwdriver or Allen key can be used to push the bearings out of the wheel
to use them in the new wheel. However, it is usually advisable to change the
bearings when the wheels are changed. Put the bearings into the new wheel with
the bolt spacer and mount them to the frame with the axle screws. Make sure the
axle has been screwed on tightly before starting again!
Bearings
Your kick scooter is equipped with precision ball bearings, which were filled with
grease under high pressure, during manufacture. For this reason, the rollers of
the kick scooter only run lightly and swiftly, while under load. Bearings are main-
tenance-free, but they are wear parts. Caution! Worn bearings make conspicuous
audible noises and their function is cons- trained. In order to maintain optimal
riding pleasure and to ensure lasting safety, you should replace bearings, as soon
as they begin to exhibit signs of being worn. In the case of full load and daily use
we recommend the replacement of the rollers and bearings twice a year. Bea-
rings are available as accessories under http://www.hudora.de/service/.
DISPOSAL ADVICE
At the end of the product’s life, please dispose of it at an appropriate collection
point in your area. Local waste management companies will be able to answer
your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. Therefore, you can find numerous
information on the product, replacement parts, solutions to problems and lost
assembly manuals at http://www.hudora.de/service/
SPARE PARTS AND ORIGINAL ACCESSORIES
AVAILABLE AT: www.hudora.de/service/
EN
INSTRUCTIONS ON ASSEMBLY AND USE
All images are examples of the design.

Chatten Sie mit Ihrem Hudora Big Wheel Style 230-Handbuch mithilfe von KI

Erhalten Sie sofortige KI-Antworten aus Ihrem Hudora Big Wheel Style 230-Handbuch

Fragen Sie alles über Hudora Big Wheel Style 230. Antworten stammen aus diesem Handbuch, mit den Seiten, auf denen sie basieren.

Big Wheel Style 230 Wartungsplan

Erinnere mich, wenn eine Wartung faellig ist
Halbjährlich
Räder und Lager ersetzen

Unter Volllast und bei täglicher Nutzung alle sechs Monate Rollen und Lager ersetzen, um die Sicherheit zu gewährleisten.

Vor und nach jedem Gebrauch
Auf Beschädigungen und Verschleiß prüfen

Das Produkt vor und nach jeder Verwendung auf Beschädigungen oder Spuren von Verschleiß überprüfen.

Kostenlose Wartungserinnerungen

Abgestimmt auf Ihr Kaufdatum. Immer kostenlos, jederzeit abbestellbar.

Mit dem Absenden stimmen Sie der Datenschutzerklarung zu. Sie konnen sich in jeder E-Mail mit einem Klick abmelden.
M: QW-35-FL

Stellen Sie eine Frage

0/1000

Empfehlen Sie Big Wheel Style 230?

Ja Nein

Häufig gestellte Fragen

A

Kein Werkzeug erforderlich. Entfalten Sie den Lenker unter Verwendung der Verschlüsse des Klappmechanismus. Stellen Sie sicher, dass alle Schnellverschlüsse sicher einrasten. Prüfen Sie die Ausrichtung vor der Fahrt.

Ist diese Antwort hilfreich?

A

Der Tretroller unterstützt bis zu 120 kg. Es ist ein Freizeit-Tretroller der Klasse A, für öffentliche Bereiche und Erwachsene oder ältere Kinder innerhalb der Grenzen gedacht.

Ist diese Antwort hilfreich?

A

Ja. Sie müssen einen Helm, Knieschoner und Ellbogenschoner tragen. Fahren Sie nicht barfuß oder ohne Schuhe, um Verletzungen auf dem Trittbrett zu vermeiden.

Ist diese Antwort hilfreich?

A

Tauschen Sie Rollen und Lager alle sechs Monate bei täglicher intensiver Nutzung aus. Hören Sie auf Geräusche, die Verschleiß anzeigen. Verwenden Sie Original-Ersatzteile für Sicherheit.

Ist diese Antwort hilfreich?

A

Nein. Fahren Sie nicht in der Dämmerung, nachts oder bei schlechten Sichtverhältnissen. Nutzen Sie nur auf Gehwegen bei Tageslicht.

Ist diese Antwort hilfreich?

A

Lösen Sie die Schnellverschlüsse am Lenkerständer. Klappen Sie den Lenkerstab in Richtung Hinterrad, bis der Transportverschluss einrastet. Stellen Sie sicher, dass der Ständer gefaltet ist.

Ist diese Antwort hilfreich?

A

Werfen Sie ihn nicht normal weg. Bringen Sie ihn am Ende seines Lebenszyklus zu einer lokalen Sammelstelle. Verwenden Sie vor Ort bereitgestellte Abfallsysteme.

Ist diese Antwort hilfreich?

M: qwen/qwen3.5-flash-20260224

Vorteile und Nachteile

Vorteile

  • Kein Werkzeug für die Montage erforderlich
  • Leichter Aluminiumrahmen
  • Vier Höhenverstellungen
  • Robuste 120 kg Gewichtsbeschränkung
  • Einfaches Klappen für Transport
VS

Nachteile

  • Räder benötigen regelmäßigen Austausch
  • Bremse wird bei Nutzung heiß
  • Keine Sprünge erlaubt
  • Schutzausrüstung erforderlich
  • Montage des Mechanismus durch Erwachsene
M: qwen/qwen3.5-flash-20260224

Produkt Spezifikation

Art

Roller

Material

Aluminium

Abmessungen

96,99 x 14,00 x 105,99 cm

Räder

23,01 cm (vorne), 20,50 cm (hinten)

Lager

ABEC 5

Maximales Benutzergewicht

120,00 kg

Radtyp

Kunststoff

Federung

Keine

Gewicht

5,20 kg

M: qwen/qwen3.5-flash-20260224

Produkt Beschreibung

Entdecken Sie den Hudora Großes Rad Stil 230 Tretroller

Das Fahren eines Kickscooters bietet große Mobilität und Spaß. Der Hudora Großes Rad Stil 230 Tretroller ist eine zuverlässige Wahl für Freizeitaktivitäten im Freien. Beim Kauf erhalten Sie die Hudora Großes Rad Stil 230 Tretroller Anleitung zur Unterstützung bei Einrichtung und Nutzung. Das Befolgen dieser Anweisungen gewährleistet eine sichere und langanhaltende Erfahrung für Sie.

Montage und technische Daten

Die Einrichtung des Tretrollers erfordert kein Werkzeug. Er kommt in einem gefalteten Transportzustand, bereit zum Entfalten. Der Lenker lässt sich auf vier Höhen für verschiedene Nutzergrößen einstellen. Die maximale Höhe beträgt 1065 mm. Der Rahmen besteht aus leichtem Aluminium. Er unterstützt ein maximales Benutzergewicht von 120 kg. Dieser Tretroller der Klasse A ist für öffentliche Bereiche gedacht und nicht für das Spielen drinnen.

Sicherheitshinweise

Sicherheit ist für alle Benutzer entscheidend. Schutzausrüstung einschließlich eines Helms und von Polstern ist obligatorisch. Fahren Sie nie ohne Schuhe, um Fußverletzungen zu vermeiden. Vermeiden Sie das Fahren auf Schrägen, nachts oder auf Straßen mit Verkehr. Die hintere Reibungsbremse kann bei häufiger Nutzung heiß werden. Berühren Sie die Bremsentrommel nicht, bis sie abgekühlt ist, um Verbrennungen zu vermeiden.

Wartungstipps

Reinigen Sie den Aluminiumrahmen nur mit einem feuchten Tuch. Vermeiden Sie aggressive Reinigungsmittel. Prüfen Sie Räder und Lager regelmäßig auf Verschleiß. Tauschen Sie verschleißteile sofort aus, um die Sicherheit zu gewährleisten. Bei täglicher intensiver Nutzung ersetzen Sie Rollen und Lager alle sechs Monate. Original-Ersatzteile sind auf der Hersteller-Website erhältlich. Lagern Sie das Produkt an einem trockenen Ort. Dies verhindert Rost an Metallteilen. Es hält den Tretroller sicher, wenn er nicht in Gebrauch ist. Sie können ihn nach jeder Fahrt von Hand zusammenklappen. Verwenden Sie auch den Doppeltständer unter dem Trittbrett.

Zusätzliche Informationen

Der Tretroller erfordert die Montage des Klappmechanismus durch Erwachsene. Anfänger sollten in den ersten zehn Minuten vorsichtig sein. Die meisten Unfälle passieren in dieser Phase. Stellen Sie sicher, dass das Logo während der Nutzung nach vorne zeigt. Prüfen Sie die Lenkerorientierung sorgfältig. Behalten Sie die Verpackung für spätere Fragen bei. Sie können die Anleitung an Dritte übergeben, wenn Sie sie verkaufen. Überprüfen Sie vor der Fahrt immer die Schnellverschlüsse. Wenn Teile locker wirken, justieren Sie die Schrauben, um die Klemme zu straffen. Ersatzräder sind als Zubehör verfügbar. Lager sind Präzisionseinheiten, die mit Fett gefüllt sind. Sie laufen unter Last problemlos, verschleißen aber im Laufe der Zeit. Hören Sie auf Geräusche, die Verschleißschäden anzeigen.

Entsorgen Sie das Gerät nicht mit normalem Müll. Verwenden Sie lokale Sammelsysteme zur Entsorgung. Der Hudora-Service bietet Unterstützung für Fehler oder verlorene Handbücher. Überprüfen Sie vor jeder Fahrt immer die Lenkausrichtung. Stellen Sie sicher, dass der Ständer während des Betriebs gefaltet ist.

Hinweis zur Nutzung: Dieser Tretroller ist nicht für Sprünge geeignet. Bleiben Sie auf flachen Gehwegen für beste Ergebnisse.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly