Manual.ly Logo

Ergotec High Charisma Bedienungsanleitung

0,0 · 0 Bewertungen

PDF-Handbuch · 2 Seiten

Deutsch

M: QW-35-FL
Seite

/ 2

Loading...
2011c195402df5cd1b96db3cc43109e0591b page 2
Thank you for deciding to buy your new stem from our company.
Compare the level number on the stem with the adjacent table in
order to check whether it is suitable for the intended use.
Before use please read the following assembly and safety
instructions carefully. Keep them in a safe place and pass
them on to the next owner if necessary.
Assembly
Basic technical knowledge is required for the assembly of this product. If you do
not have this knowledge, please use the services of a specialist bicycle dealer.
Check that the internal diameter of the Ahead stem clamp (28.6 mm) fits the
external diameter of the steer tube. There are 2 different sizes:
with 1“ steer tube: external diameter 25.4 mm and
with 1 1/8“ steer tube: external diameter 28.6 mm.
The internal diameter of the stem clamp must fit the external diameter
of the steer tube.
Next you should check the length of the steer tube, which should be
at least 36.0 mm
Now you place the stem on the steer tube. With a steer tube which is longer
than 38 mm you have the possibility of using spacers to adapt the height
accordingly.
Next you position this in such a way that it is aligned with the front wheel.
For safety reasons you should never combine the stem with
a carbon fork shaft – risk of breakage!
With a 4 mm hexagonal key you lightly tighten the lower steer tube clamping
screw
c
.
Before fitting the handlebars you should check that the handlebars and the
stem are compatible.
You should also check that the difference in diameter between the clamping
area of the handlebars and the handlebar clamp
d
of the stem is no greater
than +0.2 mm.
For safety reasons you should not combine the stem with
carbon handlebars – this could lead to breakage!
You should also make sure that the clamping surfaces are clean
and free from grease.
Now you insert the clamping section of the handlebars into the handlebar
clamp
d
of the stem and secure it lightly with a 4 mm hexagonal key.
After that you fit the Ahead screw of the bearings and adjust the play of the
headset, keeping in mind the mounting and safety instructions of the headset
manufacturer.
After you have adjusted the play of the headset you press plug
e
into the
opening of the ahead screw. You should make sure that the plug covers the
opening correctly and is not inserted too deeply into the clamping slit.
Now you tighten the two steer tube clamping screws
c
to an equal torque
of 6 - 8 Nm. Make sure that the stem is aligned with the front wheel and that
the plug is not pressed out of the clamping slit and the opening. If necessary
you release the two clamping screws once more and re-adjust the plug.
After that you set the grip ends to your individual requirements.
Now you tighten the handlebar clamping screws
f
crosswise on the stem
with a 4 mm hexagonal key to an equal torque of 6 - 8 Nm.
For safety reasons the max. tightness value of 8 Nm
must not be exceeded.
Assembly and safety instructions for
Ahead stem Charisma, High Charisma
Mountain-Bike/Race-Bike Safety Level
max. 100 kg max. 100 kg
max. 120 kg max. 120 kg
E-BIKE
25 km/h + 45 km/h
max. 100 kg max. 100 kg
max. 120 kg max. 120 kg
Trekking-Bike Safety Level
max. 100 kg max. 100 kg
max. 120 kg max. 120 kg
max. 140 kg max. 140 kg
max. 160 kg max. 160 kg
E-BIKE
25 km/h max. 140 kg max. 100 kg
E-BIKE
25 km/h max. 160 kg max. 140 kg
E-BIKE
45 km/h* max. 140 kg max. 140 kg
E-BIKE
45 km/h* max. 160 kg max. 140 kg
City-Bike Safety Level
max. 100 kg max. 100 kg
max. 120 kg max. 120 kg
max. 140 kg max. 140 kg
max. 160 kg max. 160 kg
max. 180 kg max. 180 kg
E-BIKE
25 km/h max. 140 kg max. 100 kg
E-BIKE
25 km/h max. 160 kg max. 140 kg
E-BIKE
25 km/h max. 180 kg max. 160 kg
E-BIKE
45 km/h* max. 140 kg max. 140 kg
E-BIKE
45 km/h* max. 160 kg max. 140 kg
Jugend/Young adult Safety Level
max. 100 kg max. 100 kg
Kinderrad/Youth-Bike Safety Level
12"-24"
Lenksystem
Steering system
Sattelstütze
Seatpost
The product classification of the ergotec Safety Level corresponds
to the DIN EN ISO 4210 norm for bikes and DIN EN 15194 for e-bikes.
E-bike-type: pedal assist up to the indicated speed.
* Retrofitting only with the approval of a recognised certifying
body and entry in the documents for the bike.
english
Valid: 11.05.2020
Guarantee
For ergotec stems the following guarantee periods apply:
with safety level 6 6 years or 35,000 km
with safety level 5 5 years or 30,000 km
with safety level 4 4 years or 25,000 km
with safety level 3 3 years or 20,000 km
with safety level 2 3 years or 15,000 km
Guarantee claims should be processed through
a specialist bicycle dealer.
CYCLINGRIGHT.COM
Safety instructions
The tightness of the bolts must be checked after approx. 500 km and once more
during the regular service intervals (with once a year as a minimum).
To prevent the risk of a fall or accident, the stem must always
be replaced if it has been damaged.
Do not attach any additional equipment such as a child‘s seat or
luggage rack to the stem. This could lead to excessive strain on the
stem and cause breakage.
c
e
f
d

Chatten Sie mit Ihrem Ergotec High Charisma-Handbuch mithilfe von KI

Erhalten Sie sofortige KI-Antworten aus Ihrem Ergotec High Charisma-Handbuch

Fragen Sie alles über Ergotec High Charisma. Antworten stammen aus diesem Handbuch, mit den Seiten, auf denen sie basieren.

High Charisma Wartungsplan

Erinnere mich, wenn eine Wartung faellig ist
Jährlich
Schraubenanzug bei Wartung prüfen

Den Anzug der Schrauben während regelmäßiger Wartungsintervalle mindestens einmal jährlich erneut überprüfen.

Nach ca. 500 km
Schraubenanzug prüfen

Den Anzug der Schrauben nach ungefähr 500 km zur Gewährleistung der Sicherheit prüfen.

Kostenlose Wartungserinnerungen

Abgestimmt auf Ihr Kaufdatum. Immer kostenlos, jederzeit abbestellbar.

Mit dem Absenden stimmen Sie der Datenschutzerklarung zu. Sie konnen sich in jeder E-Mail mit einem Klick abmelden.
M: qwen/qwen3.8-flash

Stellen Sie eine Frage

0/1000

Empfehlen Sie High Charisma?

Ja Nein

Häufig gestellte Fragen

A

Nein, aus Sicherheitsgrunden durfen Sie diesen Ergotec-Stiel nicht mit einem Kohlefaser-Schaftrohr kombinieren. Es besteht ein erhebliches Risiko eines Bruchs, wenn diese Materialien gemischt werden.

Ist diese Antwort hilfreich?

A

Der maximale Anzugswert sowohl fur die Schrauben zum Klemmen des Schaftrohrs als auch des Lenkers betragt 8 Nm. Sie sollten ein Ziel von 6 bis 8 Nm fur optimale Leistung anstreben.

Ist diese Antwort hilfreich?

A

Sie sollten die Festigkeit der Bolzen nach ungefahr 500 km Fahrt uberprufen. Danach sollten sie regelmaBig wahrend Wartungsintervallen kontrolliert werden, aber mindestens einmal im Jahr.

Ist diese Antwort hilfreich?

A

Das Schaftrohr muss mindestens 36.0 mm lang sein, um sicherzustellen, dass der Stiel sicher montiert und eingestellt werden kann.

Ist diese Antwort hilfreich?

A

Ja, die Garantiedauer hangt vom Sicherheitsniveau des Stiels ab und reicht von 3 Jahren oder 15.000 km bis zu 6 Jahren oder 35.000 km.

Ist diese Antwort hilfreich?

M: QW-35-FL

Vorteile und Nachteile

Vorteile

  • Kompatibel mit Standard-Lenkern von 31.8mm und 1-1/8 Zoll Schaftrohren
  • Hohe Sicherheitsstandards, die DIN EN ISO 4210 Normen entsprechen
  • GroBzugige Garantie bis zu 6 Jahren oder 35.000 km fur hochste Sicherheitsstufen
  • Klare Drehmomentspezifikationen sorgen fur eine sichere und langlebige Installation
  • Geeignet fur eine breite Palette von Fahrradern, einschließlich E-Bikes bis 45 km/h
VS

Nachteile

  • Kann nicht mit Kohlefaser-Schaftrohren oder -Lenkern verwendet werden
  • Erfordert spezifisches technisches Wissen fur eine ordnungsgemaBe Installation
  • Maximaler Drehmomentgrenzwert von 8 Nm schrankt Uberdrehmoment-Einstellungen ein
  • Schaftrohr muss mindestens 36.0 mm lang fur Kompatibilitat sein
  • Zusatzliche Ausrustung wie Trager kann nicht direkt am Stiel montiert werden
M: QW-35-FL

Produkt Spezifikation

Material

Aluminium 6061

Länge

5,0 cm

Stem-Klemmdurchmesser

3,2 cm

Steuerrohr-Durchmesser

2,9 cm

Klemmhöhe

4,0 cm

Winkel

+35 Grad

Gewicht

180 g

M: QW-35-FL

Produkt Beschreibung

Ergotec High Charisma 31.8mm 50mm Lenkerstiel Bewertung

Der Ergotec High Charisma 31.8mm 50mm Lenkerstiel ist eine robuste Komponente, die für Radfahrer konzipiert wurde, die Zuverlassigkeit und prazises Handling bei verschiedenen Fahrradtypen suchen. Egal ob Sie ein Mountainbike, ein Rennrad oder ein E-Bike fahren, dieser Stiel bietet eine sichere Verbindung zwischen Ihrem Lenker und dem Gabelschaftrohr. Das Produkt verfugt uber einen Klemmdurchmesser von 31.8mm, der mit Standardlenkern kompatibel ist, und eine Reichweite von 50mm, die eine ausgewogene Fahrposition bietet.

Die Installation erfordert grundlegende mechanische Kenntnisse. Benutzer muss sicherstellen, dass der Innendurchmesser des Stielklemms mit dem Auendurchmesser des Schaftrohrs ubereinstimmt, was typischerweise 28.6 mm fur 1-1/8 Zoll Rohre betragt. Es ist kritisch zu uberprufen, dass das Schaftrohr mindestens 36.0 mm lang ist, bevor es montiert wird. Aus Sicherheitsgrunden darf dieser Stiel niemals mit Kohlefaser-Schaftrohren oder Kohlefaser-Lenkern kombiniert werden, da sonst die Gefahr eines Bruchs unter Belastung besteht. Alle Klemmflachen mussen vor der Montage sauber und fettfrei sein.

Drehmomentspezifikationen sind wichtig fur die Haltbarkeit. Die Schrauben zum Klemmen des Schaftrohrs und die Schrauben zum Klemmen des Lenkers mussen gleichmaBig auf ein Drehmoment von 6 bis 8 Nm angezogen werden. Das Uberschreiten des maximalen Grenzwerts von 8 Nm kann die Komponenten beschadigen. Nach der Installation wird empfohlen, die Bolzenfestigkeit nach den ersten 500 km und dann jahrlich wahrend regelmaBiger Wartungsintervalle zu uberprufen. Der Ergotec High Charisma kommt mit einer Garantie, die je nach dem spezifischen Sicherheitsniveau, das dem Gerat zugewiesen wurde, zwischen drei und sechs Jahren liegt.

Wichtige Hinweise

Richten Sie den Stiel immer mit dem Vorderrad aus, um Lenkprobleme zu vermeiden. Befestigen Sie keine Zubehorteile wie Kindersitze oder Gepacktrager am Stiel, da dies zu einem strukturellen Versagen fuhren kann. Wenn der Stiel Anzeichen von Beschadigungen zeigt, ersetzen Sie ihn sofort, um Unfalle zu vermeiden.

M: QW-35-FL

© Copyright 2026 Manual.ly